led problems please help

[pizzimp]

while i was playing a game my led just stopped shooting. I had gas the gun was turned on and had a full charge. the bolt was not hung up on anything. you can hear the solenoid clicking but nothing happens, what could be the problem. The gun is also getting gas through my inline reg and into where the volumizer is i checked that. Some please give me some input on what could be wrong.

[dbentz]

did you test the phneumatics(?). There's is a way to test them in the Angel Manual, you can d/l it on this website and save it to your computer. That's what I did.

[dbentz]

Sorry I almost forgot, did you just try to turn it off then on? One time my board just glitched and every time I pulled the trigger it wouldn't fire. So I just turned it on then off then it preformed fine.

[99LED]

Originally posted by dbentz
did you test the phneumatics(?). There's is a way to test them in the Angel Manual, you can d/l it on this website and save it to your computer. That's what I did.


What site can you obtain those instructions at? And would you need a special tool to do so? :neutral:

[Bonk]

This is pretty simple to do.
1. Take off your back plate on your angel becareful there are
some wires that you could damage.
2. You will see a little orange button use a inkpen or a small allen wrench to push it in, your gun should fire real fast. I dont remember if you have to have the power on or not, but try it both ways. If your gun fires it is not the pneumatics.


I had this same problem once, I had gotten a small piece of gelatine inside my on/off switch and it was not letting me get a connection.

Hope I helped. James

[BURLEY]

sounds like the solonoid isn't getting any air.
you said the lpr did get presure? how much?