PDA

View Full Version : First shot drop off (Yes I charged it... please help me out)

Talfuchre
06-23-2003, 09:22 AM
I cleaned my Speed the other day (after some dirt snokeling) and took apart the Mini reg, the LPR and the valve to clean it. I lubed it back up and put it all back together and I am noticing a FSDO.

The Mini reg is at a consistant 350 and the LPR is at a consistant 79. I mean to say this because I noticed no leaks in those areas. I put a drop of Love Jiuce on the valve stem and noticed no bubbles but the leak may be slow.

Settle my mind here. IF this was a leak, which part would likely be the culprit. I used to get this problem every once in a while with my LCD and remembered it was a leak, but cannot remember what seal to change.

THanks,

TF
prodigykid
06-23-2003, 11:10 AM
Higher your dwell that solved all the the Tag factorys Guns.
Talfuchre
06-23-2003, 04:19 PM
How do others think about this fix. Could my dwell be too low?

TF
cryptonomicon18
06-23-2003, 04:21 PM
Originally posted by prodigykid
Higher your dwell that solved all the the Tag factorys Guns.

As he said, raise your dwell. It will increase the amount of voltage going to the solenoid and should get rid of fsdo.
Talfuchre
06-23-2003, 04:30 PM
God, I never thought about this. I love this ORG. I get so much help.... Thanks guys... Feel free to piost here as well... anyone else???

TF
cryptonomicon18
06-23-2003, 04:41 PM
Glad to help
adamholz17
07-01-2003, 11:31 AM
TAL what is your dwell set at? and guys what do you suggest he raises his dwell to? I am in the same boat. thanks.
gau17
07-01-2003, 01:26 PM
just raise it enought to stop the FSDO from happening.
punkd
07-01-2003, 01:30 PM
charge it twice i was haveing the same problem till i let it sit in my car all night and then took it out and shot it the put it back in all morning no more fsdo and adam do this cuz i saw yorus fsdo and you need to also, since your not using any special tank and your twisteds do nothing leave your dwell where its at if anything let chucky mess with it
Aaresz
07-01-2003, 07:56 PM
I was told in Chicago by the WDP techs that the prefered dwell setting was 12, or 5 led's ilumintated. If that helps at all.
SkeL
07-01-2003, 08:22 PM
12 is rather high, I suggest charging again, or trying 10ms. Which tech did you speak to in Chicago?
Aaresz
07-01-2003, 11:54 PM
I actually spoke with Eric, at both the NPPL & PSP. I am also using the long WDP volumizer with 190 mini reg pressure.
cryptonomicon18
07-02-2003, 12:03 AM
12ms does sound really high... everyone I have spoke to has recommended 8ms.
SkeL
07-02-2003, 04:16 AM
You left out information. What is your LPR at?
Aaresz
07-02-2003, 09:38 AM
If you are refering to mine it is approx. 6 bar, slightly under.
cryptonomicon18
07-02-2003, 12:40 PM
Yeah... thats around 90psi I think... i need some conversion factors here... but isn't the speed lpr supposed to be around 80?
SkeL
07-02-2003, 02:13 PM
1 bar= 14.503psi
6*14.503= ~87 psi
Your angel should be at 82psi, you can take out a shim if you'd like. It's not a big deal your LPR is a little high.
IF you want true low pressure, you can lower your LPR pressure and up your dwell. Bad efficiency, but it's LP. (if you have volumizers)
cryptonomicon18
07-02-2003, 02:35 PM
Originally posted by SkeL
1 bar= 14.503psi
6*14.503= ~87 psi


Thanks for the conversion!