sundog99
10-08-2002, 09:46 PM
i have recently put back together an old led i ve had in box
all has been relatively easy but i have some unique problems.
when gassing up the marker i have a leak that appears to be coming from the ram area at the back of the marker. i have replaced all the o-rings on the ram,the 14way & snap ring o-ring.
still leaks!!! i also have a problem with the bolt when i fire the marker with slightly rapid trigger the bolt seems to slap forward
and backward erratically and sometimes just stays forward. if i fire it rapidly and look down the feed tube the bolt doesnt even come all the way back! perhaps my mini reg needs to be adjusted? or my battery is low at least these have been some of the local peoples suggestions. any help the angel community could give would be greatly appreciated!!!!
thanks sundog99
all has been relatively easy but i have some unique problems.
when gassing up the marker i have a leak that appears to be coming from the ram area at the back of the marker. i have replaced all the o-rings on the ram,the 14way & snap ring o-ring.
still leaks!!! i also have a problem with the bolt when i fire the marker with slightly rapid trigger the bolt seems to slap forward
and backward erratically and sometimes just stays forward. if i fire it rapidly and look down the feed tube the bolt doesnt even come all the way back! perhaps my mini reg needs to be adjusted? or my battery is low at least these have been some of the local peoples suggestions. any help the angel community could give would be greatly appreciated!!!!
thanks sundog99