PDA

View Full Version : Breech nob spring

Huppa
06-09-2003, 07:04 PM
ok i popped out the back plate and the frigan spring comes shootin out and hits me in the eye not i cant figure out how to put it back on...plz H E L P
Emmit
06-09-2003, 07:20 PM
put the breech rod in, then the spring goes in the other hole on top of the little tit, and then the backplate........you're done
Huppa
06-09-2003, 07:33 PM
the spring doesnt fit right between the knob and the tit
Emmit
06-09-2003, 08:13 PM
okay....there's what appears to be 2 holes.....one hole the breech rod goes into, the other one the tit for the breech rod goes into.....then you put the spring in that hole, then put the backplate on.......the tit on the rod does not go on top of the spring or you will be pushing it open all the time.......check out the manual it should show you
Huppa
06-09-2003, 08:50 PM
yea i looked through the manual didnt find anything ill look again
where is the tit located on the finish product?
Emmit
06-09-2003, 08:58 PM
http://www.angel-owners.com/manuals/ir3/page27.htm
Huppa
06-09-2003, 09:05 PM
haha thats the same exact page i looked at in the book and then i fitted all the stuff together like it should but the spring was working opposite than it should be
gremlin75
06-09-2003, 11:51 PM
Originally posted by Huppa
haha thats the same exact page i looked at in the book and then i fitted all the stuff together like it should but the spring was working opposite than it should be

Thats cause you put the spring in first. Put the breach rod in then then the spring gos on top of the tit not under it.

later
gremlin
Huppa
06-10-2003, 05:51 PM
yea i figured out what to do thanks guys