why

[iarethree]

hey this last saturday i played and my gun kert ****ing choping. i have mem 3 and cops 1 ( i traded a guy for it) the mrof is 20 and cmrof is at 16 i wasn't going over 16. my max was 14. the dwell is at 13. does any one know why this is? or can someone post up setting that they have had work perfect for them? thanks.

[jabbster]

What kinda hopper are you using???

Sincerely,

The jabbster

[warpedx]

Follow the ball drop test setup thats in the manual for cops. Other things to check: make sure you have some grease underneath the cops sensor-its in the grip frame when you pull it off. And make sure that the yellow strip is not broken. If it is, you'll have to get a new sensor, check with the sponsors, they should have some in stock.
the mrof is what the marker is set to with cops off. cmrof is what the marker is set to with cops on. To turn cops on, push the middle button when the gun is live, the led should change color to green. Red means its off.
Another reason for chopping could be the ram stroke. Check out Ken Crane's Ram setting instructions in the technical reference fourm.
Good luck.