IR3 Grease

[Huppa]

Just got to the recommended grease point in my ir3 career after 8000 shots and in the manual it says to use Love Grease....i go out and by the grease come back look in manual to see where to apply it and it gives nothing...info on where to apply the grease would be helpful...thankyou

[Duracell]

If you only have 8000 shots, I wouldn't worrie about is since WDP puts in enough grease/ oil until you "break in" your angel. You sould be good until you have about 15-20k shots.

[warpedx]

For grease to use, Theres the Angel Extreme Grease, or Dow 33 (shocker lube).
I have used dow 33 with no problems. You shouldn't have to worry about grease for a while, but if you decide to take parts out of your marker, put the grease on those, such as your ram.

[Emmit]

are you sure it said grease and not oil???

at 8k you're supposed to oil it, the grease isn't until like 20k or 40k I think.

I usually oil mine about every 5 or 6 cases (at the inlet to the minireg, and the exhaust port) and I only did my first greasing on my IR3 recently and I'm almost at 50k.

[acoenfam1]

Yea 8K is awful early for grease. I just got the grease recommended and I JUST broke 20K. But you'll need to remove the RAM (easiest thing to do IMO) to grease it. While you have it out might as well change the O-rings at the same time.

[Huppa]

my mistake...it was oil but i dont need info on how to do that i already know what to oil...need info on what to grease tho