Shootdown again

[flippulse]

I bought my 2k3 LCD LE brand new. So my question is: Why does it shootdown during high/fast rates of fire? Some say its the LPR, but i bought it brand new. Some say its the paint-barrel match. Last time i used to gun i shot diablo-blaze for practice, and i used the insert .689 for the freak, but my teammates uses smaller size bore on the said paint. What do you think is the problem? Any help is appreciated. Thank you. See you on the field.

[Eyecare]

Some steps to consider:
Make sure there's not too much/too little lube on your gun.
Make sure you have at least 600psi going into your minireg.
Check the LPR pressure; adjust if needed.
Check you snap ring; adjust if necessary.
If these don't help see your friendly neighborhood Angel tech. :cool:

[Emmit]

after a break in period of the marker you need to test and reset your LPR. check that first, and all will be right with the world.

[flippulse]

Thank you. One more question, how many shots/cycles is the break in period?

[tgm]

i was having the same problem as you and mine was brand new too!!

i was like WTF?!?!? this is new. why is this happening?

i check the lpr it was low, put some shims in....shoots money now.

[flippulse]

So how many shims did you put in?

[tgm]

it really depends on your lpr pressure

each shim is 3.5 psi...you should have your lpr at 85psi

so put them in acorddingly (sp?)

[bunkerd50]

make sure your spring stack is exacly how it is in the manual

[bunkerd50]

you mean 95 psi.... your angel owners manual is your bible

[flippulse]

Thank you.

[tgm]

Originally posted by bunkerd50
you mean 95 psi.... your angel owners manual is your bible

no..... the manual says 85psi...im staring right at it... EIGHTY FIVE