I Need Help Asap

[Rocketman164]

Hey guys, I have a tourney this weekend and I really need help!
While cleaning my gun from the weekend I turned it on to check the battery.

When I turn it on I get the boot up screen, 'mem 2', and then 'safe'. It then cycles between the 3 of these. When I turn it to live it turns back to safe within 5 seconds. What is going on???

Any help would be appreciated guys, this is the worst timing, I'm leaving thursday night, thanks.

[Sandman]

A guy had a LCD and it did something similiar but like code 3 or something. That Meant it was below temperature but it was around 70 indoors. So conclusion was it was the thermometer.

[russ]

Check to see if your trigger adjustment set screws have moved from its orginal position. You may have to re-adjust your trigger adjustment screws. Try backing it off the microswitch.

[Rocketman164]

Well my IR3's back to normal now. When I was playing it started raining at the end of the day, because of the board probs I thought that moisture might have screwed it up. Anyways I took the board out let it dry for awhile and plugged 'er back in and guess what? Works like a dream, I'm guessing that there was some moisture that the board just wasn't liking.

[Huppa]

your board could have been overheating...has happened to my dads LCD a few times