why is it shooting so slow in cops

[pwk08]

Why is my ir3 shooting so slow when i use cops. when i was playing the fastest b.p.s was 10 b.p.s when i was useing cops. i have a egg 2, mem 6 board, my cops was at bas 5 and sen 9. when i use it with out the cops on i can get around 14-15 b.p.s. but i will chop. is it my hopper or wut. i jsut notice that i have a pinch cops wires but when i do a drop test it still reads pass. so i dont know wut the hell is going on. does anybody know wut to do?. thanx
Peace,
Fio

[cameroncarnes]

You have to set the CMROF. (Max Rate of Fire when COPS is on)

[pwk08]

cmrof20
mrof 20

[rebelace12]

I dont use cops and have never chopped!

[welt_master2005]

I dont use cops and have never chopped!

well arent you a lucky mofo, lol.

all you need to do is set up your MROF

[pwk08]

ya my c mrof is at 20
and my mrof is at 20

[stroknhelland]

check your BAS

[Cobra]

im not too knowledgable on the angel so i wont act like i am, but i do know that i have the same problem using an evo 2 on my vision freak factory impy...the fact of the matter is that the evo 2 can not continue to cycle at its proclaimed speed... people over at the IOG (impulseownersgroup) have done speed tests on the evo 2 and found that the MAX consistant feed rate on the evo 2 waas between 13 - 15 bps....what this means is the same thing it means with my impy...your rof will be slowed down because y our cops will take a while to register the ball in the chamber...

trust me halo's fix that problem, unless you have the cops 1 board..

Mike

[thekingofhartz]

your cmrof should not exceed your hoppers capability. If it does exceed your hopper then it will shoot at the bas speed instead of cmrof. i use a revy with xboard my cmrof is at 12 my sens at 12 and bas at 20. my gun works like a fine tuned machine. mrof is nonapplicable when cops is turned on.

[dark2k2LCD]

cobra--this may be trus, but even if a ball doesnt fire, as long as you pull the trigger, the rof will count it

[SCM]

<<your cmrof should not exceed your hoppers capability. If it does exceed your hopper then it will shoot at the bas speed instead of cmrof. i use a revy with xboard my cmrof is at 12 my sens at 12 and bas at 20. my gun works like a fine tuned machine. mrof is nonapplicable when cops is turned on. >>

If your going to set the cops max rate of fire so low you might as well turn it off.

The cops rate of fire should be at the max, that is the reason for the anti chop system.

Without cops, I had my max rof at 12.

[ReyRex]

First thing you need to do is set your cmrof. My was set at 18 with an EggII. And I never chopped but my max rate of fire was 12. I reset it the cmrof to 20 and I noticed I would out shoot the hopper. It even chopped twice! Bas of 4.

You need to get a hopper that can give you higher rate of fire. I just ordered a Y-board for my egg so I'll let you know how that goes once I try it.

[FamousFallChild]

CMROF 20 MROF 16 Halo B never chops

[Cobra]

as i said im not angel savy, but ive noticed that the ir3 has basically the same problem my impulse does with the evo 2....workin at the field gives me the opportunity to "learn: and thats why im here, to learn about the ir3 before i purchase my rock ir3 ....

hopefully my answer was of some vauge help

Mike

[thekingofhartz]

i guess the IR3 manual doesnt know how the gun works

[thekingofhartz]

Originally posted by SCM
<<your cmrof should not exceed your hoppers capability. If it does exceed your hopper then it will shoot at the bas speed instead of cmrof. i use a revy with xboard my cmrof is at 12 my sens at 12 and bas at 20. my gun works like a fine tuned machine. mrof is nonapplicable when cops is turned on. >>

If your going to set the cops max rate of fire so low you might as well turn it off.

The cops rate of fire should be at the max, that is the reason for the anti chop system.

Without cops, I had my max rof at 12.

LOOK AT PAGE 11 IN YOUR MANUAL !!! Unless you traded your manual away with your gun for a peice of junk timmy like a bunch of idiots are doing

[thekingofhartz]

PAGE 11 in your manual . UNless you traded your manual and gun away for a peice of junk timmy like some many idiots are doing

[thekingofhartz]

top of page 11 in the manual read it

[Kriptic]

ouch man... just crank up the CMROF to like 20 and set the BAS and SENS level so it is less sensative to paint.. oh yeah page 11 has al lthe info in case you didn't see... hehe people are brutal aren't they?