Stock trigger adjustment ( Dark IR3 )

[Huppa]

i have taken apart my trigger fram and i have looked in the manual but they give nothing on shortening trigger all i have done so far to shoren the trigger pull is screw down the over travel...i was wondering if i should do anything with the pivots the spring or the return stroke? info on shortening trigger would be very helpful ty

[Prophet]

Search. It has been covered thousands of times.

[Huppa]

yea i did that too heh nothing has been really specific enough...well ill try it again thx anyways

[ffry]

as far as i know, its fairly similar to lcd trigger adjustment so.....


turn the gun on, turn the back screw in till it the serial number comes up, then turn it back till it says safe, that makes the trigger as short as possible, then back out the front screw till it is flush with the top of the frame, then turn it in a tad


that is for the shortest pull possible, you can mess around wiht small adjustments after that if you like

[MoogLe]

the pivots just give it a diferent feel, so does removing the spring or putting a lighter spring

[Kriptic]

for nice and crazy feedback on trigger pull and adjustments look for the posts regarding it from both Kriptic( myself) and someone named CAPNUT look him up first. he does everything and by searching his name you'll be all good... some void warranty and some do not so read them all before you go gung ho

[ffry]

yeah i use the back pivot point on my spaceframe on my lcd..... its quickest and most comfy for me