Firing issues

[Khaotic]

I have done a search, and Skeletar had a similar problem to me but I think mine is abit unique.

I have the trigger bounce problem, but before I start to adjust the trigger from the factory settings, there is another thing bugging me. With Sensi OFF, sometimes the marker wont shoot at all unless I shake it or aim it down. Then when it does shoot it goes full auto for a few shots.

With the marker on but no gas, it shoots everytime I pull the trigger. Any suggestions before I adjust the toe?

[CpCnCir3]

it sounds to me like your TOE adjustment is pretty off to the point where its barely activating. thats whats causing it not to fire. back the TOE adj. out til it stops acting up.

[Vantage_TeS]

:dito:

[Khaotic]

Ok, as long it is just the trigger and not a board or other serious problem. I will play with the TOE tonight.

Thanks

[Zimm98]

Hace you carged your battery sence you got your gun

[Khaotic]

Zimm, I think the answer to your question is yes, i have fully charged the battery and I do not believe that this is the problem.

Vantage_TeS and CpCnCir3, when you say back the TOE adj. "out", does that mean away from the actuating bar or towards it?

I moved it away last night, and then fired some gas through the marker. The trigger pull is abit longer and the problem seems to have disappeared... both the non-firing and the bouncing. I just dont understand how I can solve both at the same time? Surely backing the TOE out would solve the bounce and moving the TOE in would solve the non-firing problem. How would backing it out solve the non-firing problem?

[Osmoosi]

If it was too far in, it was keeping the trigger switch from releasing.

[Khaotic]

Hmmmm.. That does make sense. Thankyou