Speed Trigger not set right?

[speedangel333]

Hey, just got my new speed the other day and when i pull the trigger it likes do go in full auto. i ow its from the recoil but ive tried adjusting it but it still does it. If someone could help it would be awesome. maybe even a picture of where you have your set screws. Thanks


My setup is black dust speed. crossfire 68/4500 450 output. X-board revvy. and stock everything else.

[Syentific]

Normally guys just adjust the toe screw. You must not be adjusting it far enough. Either that, or make all three screws nice and sloppy and then tighten up from there. See at what point it starts to shoot on its own and then back off from that point.

[IMPerfection]

yeah i was sitting with the gun in my lap yesterday and i pulled the trigger and it just took off on full auto for about 50 shots before it stopped. It was incredible. I cant get it to do it unless im sitting down tho, it shoots normal when I'm playing so I dont worry about it. Adjust the TOE screw (unscrew it) to male it stop.

[speedangel333]

I've tried adjustimg the toe screw and it will fire multi burst from shot to shot. does anyone have any pics of where there screws are. thanks

[Vantage_TeS]

Check you manual under the parts diagram

[SkeL]

this has been mentioned in the sticky at the top of the speed section :)

[speed123]

dude, iheard you man, today at my field i had some sweet (illegal) bounce, over a red crono after shooting fast very fast i got it up to 19 balls per second with a halo. no jk. it was sweeeeet

[soulsuprememyk]

how small can you get the tigger pull on a speed?

[speedangel333]

Hey, the trigger yuo can get very short especially with the opto board on it. But i fixed the problem. i just kept messing with the screws until i got it right. it took awhile but i got it. thanks TAG for a great gun. see ya. thanks for the help