Input pressure for LCD W/Apocalypse

[pdasilva]

First time posting, so, please hollar if I goof this up. I have a 2002 lcd with stock reg, and an Apocalypse 88/4500( I need a new tank, I know), I need to know what the pressure on the input should be? I have it @ 650 but it seems too high? :doh:

Also is there anyway to guarantee you get a "new" board if you have to replace it, seems there is a lot of bad boards in circulation, do they just seem to re-circulate/ cAN YOU JUST BUY A "NEW" BOARD DIRECT and avoid the re-accuring headaches?

Thanxs for all responses...

[C.Carles-AOG]

Don't starve your reg. 650psi seems fine, I know people that have run it on 550psi, as long as the flow rate is good, the reg is being fed, and the LPR pressure is ok then don't worry about it.
As for a board, go to a certified tech, like all of the sponsors, and they won't be using second-hand boards.

[karrkrash01]

first oof the only reason you would need a new tank is to change sizes if your unhappy with that. other than that ur tank is of very high perfoamnce. as for how much input i would ssssay around 550 to 600 but i have a friend that has a dynaflow and he runs that at 325 into his ans gen-x reg which is also set at 325 and he has had no problems whatso ever. he can shoot his gunn so fast on the field. he plays back and shoots 13 to 14bps