Rail Mount

[Epic800]

I currently using a 68/4500 with a Micro Myth but the tank can't screw in far enough because of guage hitting up against the gun. So I was thinking a rail would work, if so which one? If anyone has any other methods please tell me.

[outback]

I ended up going with the CP, I had tried the BloodLine series (Tyler's line), however it did not fit that great. But the CP Rail works great, The 2 screws that come with it are not too long that you have to worry about them hitting the Board, and the 3 sidewall grubs lock down the ASA great. CP also makes a small Rail that only uses 1 sidewall grub screw to lock it down, I would not recommend it over the slightly longer one.
I had to go with a rail cause My A1 would not grip the ASA tight enough and it would slide around. I even broke one of the conical screws, trying to rapidly tighten it up before an SPPL game. So I gave up and went to a rail.

[Epic800]

Do you have a link to where I can find it?

[outback]

This is the one I went with

http://store.customproducts.us/index.cfm?fuseaction=catalog.prodInfo&productID=6&categoryID=0

[sipple31]

that's the same one I got for my A1.... love it!

[Epic800]

So just making sure it will drop it enough for me to fit my myth reg?

[sipple31]

well what kinda ASA do you have? You could always slide it back on the CP Rail?

[Epic800]

Im using the stock asa

[budda]

I am sure it will. I would check on Ebay for a rail normally they are really cheap.

[Epic800]

Yeah I found one for a good price so im going to take my shot at it.