PDA

View Full Version : Need Very Hot Settings Not Legal


socadens
05-21-2008, 06:40 AM
Hi,

I have a A1 with pulse loader not yet in RF but it's coming ...
I need some good settings for my A1, even if they are not legal.
I mean it's just for trainning with my friend and they have Shockers so i need a very fast mode in order to show them A1 is the best.
Thx.

pittbull01231
05-21-2008, 08:25 AM
Well use the Joy settings at http://wdp.tv/newsupdate/281106-update/281106-updates.html they are on the right side of the page. chill your paint DONT FREZZE, just chill get it nice and brittle and put the marker on xball mode and go to town.

socadens
05-21-2008, 11:54 AM
Well use the Joy settings at http://wdp.tv/newsupdate/281106-update/281106-updates.html they are on the right side of the page. chill your paint DONT FREZZE, just chill get it nice and brittle and put the marker on xball mode and go to town.

Ok ok, i'm going to test those settings but i haven't the mano to set the pressure.
But i will try the settings and i'll tell you what i think of those.
Thx

You think i'm gonna shoot like a SHOCKER ?

:xena_banana:

socadens
05-21-2008, 12:04 PM
ok so i tried those settings ... And i don't think the A1 shoots like a SHOCKER ...
Damn, i tried :
- Mode = Xball
- Valve Dwell = 6.5
- De-Bounce = level 1
- Paint type = hard 11
- Mrof eyes oN = unlimited
- Mrof eyes off = 18
- Breakout ????
- Ramp feature ????
- Shot filter = 5%
- ABS = 0.25

I don't know where is LOADER SPEED ?

What i have to do ?

lthg
05-21-2008, 12:22 PM
what do you mean, "shoot like a SHOCKER?"

The thing is an angel, not a shocker.

Are you trying to get it to shoot as fast? Faster? Quieter? Louder? Ramp harder?

A little more detail is needed to help us figure out what you specifically want it to do.

When I read your thread title, I thought you wanted to know how to make your gun shoot hot, (velocity above 300fps)

I will assure you that the A1 can shoot just as fast if not faster than Shockers.

poopresearch
05-21-2008, 12:23 PM
NXL is capped at 15 BPS. If you want speed set up a custom mode. Semi + HR with MROF uncapped. That paint type setting listed above is pretty aggressive. I'd recommed bringing it back into the medium range.

socadens
05-21-2008, 12:43 PM
what do you mean, "shoot like a SHOCKER?"

The thing is an angel, not a shocker.

Are you trying to get it to shoot as fast? Faster? Quieter? Louder? Ramp harder?

A little more detail is needed to help us figure out what you specifically want it to do.

When I read your thread title, I thought you wanted to know how to make your gun shoot hot, (velocity above 300fps)

I will assure you that the A1 can shoot just as fast if not faster than Shockers.

ok i'm sorry ...

I want my A1 shoot faster or as fast as a shocker ...
What does mean ramp harder ?
THX

MVS1
05-21-2008, 03:45 PM
Ramp harder means faster, here ya go...
Go to "Custom" and select Semi+HR (Hard Ramp)
Set your Ramp delay to 1 or 2 your choice
Set Ramp BPS kick in at 1 BPS
Set Ramp Drop out at 2 BPS
Eyes on Unlimited
Paint type between 6 to 8 is pretty safe

Only thing holding back how fast it will shoot is loader feed rate, to max out the pulse's feed rate pull out the feed tray, remove the clear plastic bottom cover on it, remove the small circuit board (speed control board) located right above the 9v power plug and flip it over, turn the only pot on the board full clockwise and then have fun. My pulse's sync'd to my A1 running this combination are RIDICULOUSLY fast, of course I "would" never play with this setup because you'd be over-shooting the §§§§ out of people and plowing through paint like Rosie O'Donnell with a box of chocolates.

sonny7
05-21-2008, 03:52 PM
lulz on Rosie..

budda
05-22-2008, 01:45 AM
I have a Dark shocker and mine shoots just as fast as my A1, It has a tadao dynasty board in it as well. the only differance is it does shoot a little smoother than the A1 in my opinion. I am using the joy settings as well.

Just set the trigger and practice shooting fast.

Thats all I can tell ya.

socadens
05-22-2008, 02:32 AM
Ok thx guys.
I'm gonna try all your advice.

sipple31
05-22-2008, 08:11 AM
ok this is no offense to you socadens... but it bothers me when people get all wrapped up about shooting super fast. I think that as long as your gun can shoot 12 bps or so you should concentrate on your play and just get comfortable with the gun.

socadens
05-22-2008, 11:33 AM
ok this is no offense to you socadens... but it bothers me when people get all wrapped up about shooting super fast. I think that as long as your gun can shoot 12 bps or so you should concentrate on your play and just get comfortable with the gun.

No problem, loool
I don't play with this features.
I just wanna show to my friends that the A1 is a very good gun.
It's not for play with those settings.
I just wanna have the same rate of a shocker or faster.
They all think SHOCKER is the best !!! because of the TONTON ...
And i'm tired about hearing this.
Thx

Usurper
05-22-2008, 03:22 PM
They all think SHOCKER is the best !!! because of the TONTON ...
And i'm tired about hearing this.


Well then I have some wonderful news for you. The TON TONs just signed a deal with DYE. No more Shockers... Problem solved!

socadens
05-22-2008, 05:37 PM
Well then I have some wonderful news for you. The TON TONs just signed a deal with DYE. No more Shockers... Problem solved!

loool
I know that because i knows some member of the TONTON ... They all have a new fresh DM8 ...
But in France, particulary in Marseille, they all love the SHOCKER ... So my problem is not solved.
So i 'll try those settings ... just for fun !
Not for the GAME.
THX

Evil_Angel
05-28-2008, 05:51 PM
You want to see stupid set up a Q loader wound as tight as you think you can. Run the marker on demo mod. Yes the eyes don't work on demo mod but the Q will feed the monster.

Stupid amount of paint.