Un1 install?

[Angeloyal]

I just got a un1 board for my 2k2 dark lcd. Can anyone direct me to a detailed list of how to install it. I am not that talented with the mechanics of angels. Thanks so much.

[Shibbykins]

just put it in the grip and see what you need to do to set t in right. may have to pop off the tab at he bottom. i forget specificly

[dr.strangelove]

Yep, remove the bottom tab, screw the board into the frame. You also have to either bend the metal leaf on the microswitch to reach the trigger, or drill and tap a hole in your trigger for a set screw to reach the microswitch. Either way will work.

[Angeloyal]

Hey my angel will shoot like two shots then stop and ill have to wait like 3 or 4 seconds before it will shoot two shots again? Is that because of one of the regulators?

[dr.strangelove]

I don't want to clutter this thread with non-board related questions, so I'll PM you.

[NuMnUm9000]

i just got what i think is a cnc red to purple fade lcd from my dads friend with a lucky board. i cant figure how to cock it or anything. so some help would be awesome thanks

[dr.strangelove]

You need to spend a lot of time with the manual and in the stickies at this website. Manual: www.wdp.tv/manuals

[lthg]

i just got what i think is a cnc red to purple fade lcd from my dads friend with a lucky board. i cant figure how to cock it or anything. so some help would be awesome thanks

lol, screw the air into it!

Make sure you are using N2 or Compressed air, and NOT CO2!!

Welcome to AOG, and read the stickies for the LCD.

[NuMnUm9000]

ok. well ive looked for the instructions on the lucky board and cant find a thing for it. and i dont have the manuals and myself being not so bright cant make heads or tails of the online manual. but thats off topic. just want the board instructions. anyone have the link?

[tehVirus]

no need to cock an electronic gun man...(at least ive never seen one). on a side note becareful about the trigger pull if you have been using a mechicanal gun. as for the board the manual is your best bet, just make sure the marker is charged and the safety is off. good luck to you sir. =)

[dr.strangelove]

Instructions for the Un1 board will depend on what chip you're using. You can find the ACE chip manual at www.fixmyangel.com I believe.

[NuMnUm9000]

well i dont know what chip i have in it. and i wasnt sure if the angel was different than my ion or not.