guerrilla myth regulator good?

[beastmar]

hey guys, I was just wondering if I should get the guerilla myth reg or should I get some regulator that's made for low pressure?

[psycko069]

one of my team mates uses them on his ego. he swears by them. i have personally nver had an experience with them, but from what ive seen on his ego they work flawlessly. on an angel im not sure though....

[mokman88]

Safe bet would be to probably just go with a crossfire LP or CP LP reg....

Also, if you have the stock rail on your A1 the guerilla myth reg is too short and will not be able to thread all the way onto your asa. The tank will run into the marker before you can screw it in all the way....

I think there was a thread talking about this a little bit ago, you may want to search for it and ask the guy that made that thread what his experience is....but again if I remember right, the Myth Regs are too short and wont screw into the stock asa for the A1.

[beastmar]

Safe bet would be to probably just go with a crossfire LP or CP LP reg....

Also, if you have the stock rail on your A1 the guerilla myth reg is too short and will not be able to thread all the way onto your asa. The tank will run into the marker before you can screw it in all the way....

I think there was a thread talking about this a little bit ago, you may want to search for it and ask the guy that made that thread what his experience is....but again if I remember right, the Myth Regs are too short and wont screw into the stock asa for the A1.

Oh ok that's what I thought. It will work if my a1 had a rail though huh? Thanks man

[mokman88]

It should work with a new rail or asa on your A1...you just need to check the preset pressure on it. I believe the Myth regs have different presets depending on which ones you buy..

[budda]

ALL of them are HP

[mokman88]

well there ya have it lol...all are hp. Thanks Budda!

[Trigga Nometry]

My Myth reg is putting out 600psi on the money and works great. So some Myth's are considered Mid-Range. Check eBay and you'll see most are even labeled as Mid-Range.

My first choice is still a Crossfire though.

[beastmar]

alright cool. only if I could take out my p.e. reg from my tank.

[Vicious]

I've got myths on both my tanks and they work great on my A1. haven't tested the output pressure on either of them though so I couldn't give you specifics. I use the stock angel engraved rail with the stock asa and it fits...but just barely. I've got the rear of the asa in line with the rear of the rail.