A4F not firing

[FRANK MARZOCCHI]

my a4fly is not firing when you put air to it, there is no leaks, when you pull the trigger you get a klic sound and thats it.

can someone please and try to help me on this, also using a lucky board and ace chip with it, this can't be the problem???

thanks

f

[Mavrick]

First.
New battery. Then do an eye test. Then turn off eyes and try to fire.

Tell us what happens.

[FRANK MARZOCCHI]

thank you, did the steps, still nothing, like i said, no leaks, air is in the marker but it won't fire, can it be the niod in the gun?

frank

[Mavrick]

Ok, check to see that your solenoid is plugged into the proper spot on the board. It should be in the "sol" socket. The other socket of the same size if you have one on that board is for the intellifeed port out.

[FRANK MARZOCCHI]

everything is in the right place, i think the solnoid is shot, will have to take it apart, it is working but it sounds very weak,everything is fine, air is there, no leaks, like i said its not firing at all.

f

[FRANK MARZOCCHI]

thanks to all that help, she is up and running again.

f

[Trigga Nometry]

Was it the 'noid? Just wondering. What was the fix?

[FRANK MARZOCCHI]

all i did was cut the red/black wire, the red one was cut a bit, cut them, wrapped the wires together and bang, sound as good as new, saved 150.00 for a new one.

f