New to Angels...Battery issues !!

[oughtt6]

How-DO pplz! Just bought an E-bay Speed. THey could not tell me the year but I am guesing it is an 04 as the manual that came with it say's 4.8v battery. Angels are a whole nether breed from what I am used to !! The battery was dead, dead, dead, when I got it. Charged it about 3 hours, checked it and it just had the one blinking red light. But from what I understand from reading in the tec forum the whole light bar should be lit up, droping down as the charge was deminished?? What I got is one "1" green light on ??? I put an SP ASA with rail on ,turned on the air and it seems to dry-fire just fine{ Feels like just as must air preassure on first shot as 10th shot. Is this the way it should be reading on the LED ??? Also I can not pull the pin back to open the breach ???{ I made sure the bolt was all the way back} Any info on year, where to send it it for milling for eye's, and general servicing ? If I did upgrade I think I would rather go with the Virtue or is this not the betta board ??? Also...where's a good place to find items to trick out the Angel ??
A couple pics of Marker and what LED lights I speak of ...
http://i7.photobucket.com/albums/y256/oughtt6/100B6430.jpg
http://i7.photobucket.com/albums/y256/oughtt6/100_6409.jpg

[Shibbykins]

looks like your sensi is on therefor you prolly have a battery charge. light will go up then down upon boot. the lights on the side are for ROF telling you where your roughly at speed wise.

any MT can do the eye conversion for you and service your marker.

[speedysprocket]

the ram is over adjusted. to fix easy, take off the back plate, two screws, then you will see a gold circle on the bottem right tube. Use a pair of needle nose pliers and unscrew it so the roto breech will open. when you close the breech, you want it to click. Just take it easy when adjusting that ram, you do not want to get a pretty gun like that scratched.
~Eric