I need parts? HHEEELLPPP

[jdmpurest]

i just picked up an 05 speed ive wanted an angel since i was like 12 and i finally got one and im obsessed with it, its so smooth and beautiful, and fast as §§§§. but i want to start moding it but i cant find any parts only volumizers. what about the evolve stuff, i cant find it anywhere. I found dezign bolts im going to get that soon. help would be appreciated I cant find anything.

[Shibbykins]

ok listen

evolve isnt made anymore, u can find some lite kits for like 50 and fulls for under 100 if ur lucky - ranger joe has an evolve lite for sale i beleive

the dezignz bolt is crap. the stock soft face is the best bolt you can use, and it comes STOCK

[darklcdfeller]

agreed with shibby. The stock bolt is [U]THE[U] best bolt you can have in you gun. as far as evolve kits go... I had one on my mastertech a4 fly. I hated it... it never worked rite and it was hard to tune. i just eventually sold it. you are better off to just put one of the smooth large volleys from wdp on your lpr side and leave it. you can tune it by taking out lpr shims and lowering or raising the dwell.

just my 2cents

thx
Ac

[jdmpurest]

where do i get the wdp volleys ive heard its best to put the medium one on. ive seen the kits on like ebay and everything like the 3sum packs but i want to buy from a reliable source the only site that works is fixmyangel. i was going to send my gun it to get the ver7 flash too cuz i think i have ver2. my guns in a different state so i want know till i go back home on the 3rd, is fixmyangel a good place to get that done at? what about the cp regs too ive heard those work great i want to get one or like the bolt should i just leave on the mini reg thanks again

[Shibbykins]

all the MT's do good work.

J

[speedysprocket]

the evolve lpr is crap, if you can find a hammer, that is the best part, I never tryed to deal with the evolve volly. if you can find that hammer, and then mill some of the plastic off the middle, down to 9 grams instead of 10 grams, the marker will have no kick. As for the LPR, i love my JDS. I bought it wih the gun, so I did not deal with the company.

-Eric

[jdmpurest]

all the MT's do good work.

J

Only one website works.

[Shibbykins]

FMA is always running, BOB runs it.

performance angel is up just limited, easiest way to get something from there is to email KEN.


J

[Bigal1]

My question is: Do you actually need a volumizer? If so, why?

[Shibbykins]

the evolve lpr is crap

i will admit eric that the evolve LPR is a bit on the bitchy side to tune but once you have it dialed in you wont regret it.



My question is: Do you actually need a volumizer? If so, why?

vollys just provide more area for air thus giving a lower op. pressure. you dont NEED them but they are a nice addon. theres prolly a thread in the technical section

[speedysprocket]

i will admit eric that the evolve LPR is a bit on the bitchy side to tune but once you have it dialed in you wont regret it.



sorry shibby, i didnt meen it like that, i havent used them, most of the people that i have talked to, said that they are not worth the trouble.

[Shibbykins]

no offence taken. i just by chance might have a evolve lite kit. ill keep posted

J

[darklcdfeller]

no offence taken. i just by chance might have a evolve lite kit. ill keep posted

J

u have everything.

[Shibbykins]

well duh, u should see the stuff i got in the mail today :D

[darklcdfeller]

ooo anything good.

*Not meaning to hijack thread but...*

[yps]

I have had good luck with my evolve lite kit . I use a JDS LPR and love it too. I have the evolve bolt but really dont see any difference from stk. bolt as far as performance . One thing I have noticed about the evolve valve is its a bit picky when it comes to different temps. I had to readjust the last time I was playing . But take in note that it was snowing!!

[jdmpurest]

what about the evil valves and the cp vollys i think im going to get both of those this week.

[Usurper]

I don't think you'll find a single person on this forum who would recommend putting Evil parts in your gun.

:open gun, insert junk:

[darklcdfeller]

yea... evil stuff= evil things happening in your gun

[yps]

I tried a evil valve in my lcd . I removed it a few hours later . It was junk!

[jdmpurest]

I don't think you'll find a single person on this forum who would recommend putting Evil parts in your gun.

:open gun, insert junk:

lol thanks for the advice guys ill def stay away from that crap

[Shibbykins]

the lightened valve stem is what others have based mods off of tho

[eVoPaNoP]

Sorry to bring back an almost 3 month old thread... but, are there any scythe/wave style triggers that will work on the 05 Speed?

Would this work? http://cgi.ebay.com/CLEARANCE-FBM-ANGEL-IR3-04-SPEED-Wave-Delrin-Trigger_W0QQitemZ330118062438QQihZ014QQcategoryZ47 241QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[speedysprocket]

no, it will not work, different trigger frame/set up.

[eVoPaNoP]

no, it will not work, different trigger frame/set up.

Hm.. Anyone know of any wave/scythe style triggers that will work on the 05 Speed, then? :o)

[speedysprocket]

ya, cp if you can find one.

[eVoPaNoP]

ya, cp if you can find one.

Eh...

http://store.customproducts.us/index.cfm?fuseaction=catalog.prodInfo&productID=149&categoryID=12

Not exactly the trigger style I was looking for... but, I guess if that's all that's available, it'll have to do. :o)