PDA

View Full Version : how does it work???


billy1
12-17-2007, 08:06 PM
Hi I just got my new A1 and last sunday went to my local field to test all the modes that this animal has. When I tried to put the CUSTOM semi+SB+SR or any other combination with breakout mode it wont go the first shot on full auto. It has the 2.2 software.

Can anybody tell me how does it work this thing????

I tried it with paint, eyes on and air. I've read every sticky and can find it.

Thanks for your help guys

darklcdfeller
12-17-2007, 08:19 PM
one way to figure these kinds of things out is to maybe read your manuel. if you cant read bob or ken might possible have A1 manuel on tape for your purchase.

As far as i know sb means soft breakout and sr soft ramping. when i had my A1 the fastest i ever had mine was semi+HB+HR= semi+hard breakout+ hard ramping.

thx
Ac

MVS1
12-17-2007, 11:15 PM
Ac, you forget t take your med's this morning? J/K. Billy welcome to the family, If you read your manual page 11 and 12 cover how to initiate breakout mode once it has been selected, this is cut from the manual in the sticky link...
Soft break out
Once the soft break out feature has been selected
from the custom modes screen and the Angel is
on and live it will fire as if it were in normal semi
auto mode until the break-out mode is activated. To
activate the break-out feature press the navigation
switch inwards, the alarm will momentarily sound to
indicate that the break-out mode has been initiated.
In order for the Angel to start firing in the break-out
mode once it has been initiated a rate of trigger
pulls higher than 4 per second must be reached and
maintained within the time period that the break-out
mode is active. The duration of the time period that
the break-out mode is active can be adjusted. The
range for this adjustment is 1 – 20 seconds. If the
rate of trigger pulls at any point once the break-out
mode has been initiated fall below 4 per second or
should the trigger be pulled and held in for 2 seconds
or the time period of the break-out elapses the breakout
mode will revert to the previously selected mode.
Hard break-out
Once the hard break out feature has been selected
from the custom modes screen and the Angel is on
and live it will fire as if it were in normal semi auto
mode until the break-out mode is activated.
To activate the break-out feature press the navigation
switch inwards, the alarm will momentarily sound to
indicate that the break-out mode has been initiated.
In order for the Angel to start firing in the break-out
mode once it has been initiated the trigger must be
pulled and held in within the time period that the
break-out mode is active. The duration of the time
period that the break-out mode is active can be
adjusted. The range for this adjustment is 1 – 20
seconds. If the trigger is released at any point once
the break-out mode has been initiated or the time
period of the break-out elapses the break-out mode
will revert to the previously selected mode.
Now as for custom semi-SB/HB and SR/HR you will need to set everything correctly in your parameters (keep reading the manual, if it still doesn't make sense feel free to ask) and activate it as per the above instructions to get it to work preoperly. Hope that helps clear things up for ya.

billy1
12-18-2007, 02:52 AM
darklcdfeller - if I asked was because I already read the manuel and couldnt figure it out. Take your chill pill in the morning dude

MVS1 - Thanks a lot for your help. I'll try it tomorrow, you've been very helpful.

Shibbykins
12-18-2007, 02:58 AM
billy, Ac was right on the money with the manual thing, alrays refer to it and the stickies as well as the search function before creating a new thread, it continues to keep the forums clean and orderly.

as you can see MVS1 provided you with the info which WAS INDEED in the manual located in the stickys and/or with the market you got. furthermore if you stillc ant figure it out let us know


J

governmentg
12-18-2007, 02:50 PM
dont forget to push in the "wheel switch" once to activate the breakout timer and enter breakout mode

darklcdfeller
12-18-2007, 02:57 PM
wasnt tryin to hit you below the belt or anything i was just saying what shibby said two posts above.

thx
Ac