Best Vlocity Hopper Settings on A1

[Squishy OWNS YOU!!]

What is the best setting for your Vlocity Hopper on an A1 running NPPL and Pro settings? Thanks in advance!

[Shibbykins]

shoot i forget what setting that is... damn gov pc

[Valas]

I have no problems running it on 1 (no tension). Let the Vlocity eyes do the work and saves the batts. If it happens to chop, up it to 2 and so on.

V

[skilz]

I'll usually set it to four (20 bps), but in cold weather like we're having now I'll bring it down to 3 (16 bps) or even 2 (12 bps) depending on how brittle the paint is.

[Valas]

How did you get the BPS numbers for each setting? Your numbers seem low based on reported free fall rates.

[Maddogmsd]

Unless I'm mistaken, the settings only have to do with the amount of tension put on the first x number of balls, I'm not sure how many are sitting on the impellor and in the feedneck, but after those first few balls the vlocity spits out at the exact same number of bps no matter the setting. The settings are for out of the gate speed.

[skilz]

I should have explained my numbers better. Maddogmsd, you're right the settings are only for tension on the paintballs. I used an example my local shop gave me in sort of understanding how the settings affect how fast the loader feeds your gun, which ,although my numbers aren't exactly representative of the actual feed rates, translates into less tension = decreased rate of fire for your gun (provided your eyes are on). Sorry If I caused any confusion.