Bolt stick problem

[Kenny_Long]

Before hand,
I have all the joy settings with my HPR at 270 and my LPR at 59.

My A1's ram/bolt just started sticking forward and keeping the valve open until I pushed it back. My exhaust valve is new though.
I replaced my detents and my breach seal as well. No effect.

Any ideas?

Thanks in advance.

[Valas]

Have you by chance fired it without the bolt in place and smacked the body/breech? Have you pulled the ram and regreased?

[Kenny_Long]

I have not shot it without the bolt in place.
I could not disassemble the ram to grease the internals according to the cards but I oiled what I could.

[Kenny_Long]

I just made sure my stem was aligned correctly. Put a hopper through it with no problems. Hopefully this solves it.

[Valas]

The ram does not come apart like the cards show. Good to hear you got it working. Maybe it was just having an "off" day.

V