more lcd problems

[gain_man]

Alright, so my lcd troubles continue. Gun airs up with no leaks finally. When i pull the trigger, the gun sort of "burps", but does not fire. Its like not enough air is getting through. If i open the breech, i could see the end of the ram moving very slightly.

The lpr was just replaced
2 different hprs were used
hp tank that deffinetly works 850 psi
lpr is set to about 90

i dont know what else to try. any suggestions?

[Shibbykins]

whats dwell set at? (always my frist question) and how are the seals on the ram

[BenRoper#69]

adjust the dwell, clean and lube it all. and if that doesn't work bring it into a local shop and have them look at it.

[gain_man]

gonna charge the batt and get back to you on the question

benroper- why the hell would i bring it to a shop?

[Shibbykins]

i was just thinking about all this... is there any leaking comming from ANYWHERE. I was thinkn maybe a noid issue..... also it could be that ur battery was low and not able to properly power the noid....

J

[BenRoper#69]

see if they can figure it out if you cant.

[gain_man]

bad battery is possible. the thing has been in the closet for about 5 years. im sick of sinking money into it :(