View Full Version : Shot Filter % Help?
Ir3Mike6909
11-26-2007, 08:59 PM
I read the part in the manual like 20 times and dont understand the shot filter %. All i know is my gun seems to have trigger delay and isnt as fast as i know it can be.
I was just trying every mode and on PSP or NXL especially i notice the BPS is definately not 15. I used a BPS radar and it was around 12-13. I used a velocity, a halo, pulse, and reloader and couldnt get it passed 13. On custom semi auto with Hard ramp i had it at 15 no problem tho.
Ir3Mike6909
11-26-2007, 09:03 PM
I had my shot filter at 5%. And my paint setting was at medium 9. And these loaders fed my ego fine at 15.
What's your dwell at? MROF setting? Have you tried adjusting the trigger? What about FPS consistency over the chrono, a lot of variation or pretty solid (+/- 2 or so)?
Sight
11-27-2007, 09:05 AM
What about FPS consistency over the chrono, a lot of variation or pretty solid (+/- 2 or so)?
Mine is all over the chrono like that.
The paint settings could affect it also.
Ir3Mike6909
11-27-2007, 08:12 PM
The FPS is consistent. My MROF is inlimited w/ eyes on. I even tried it at full auto at unlimited with my velocity and it barely was 14 bps. It just seems to have a bad delay.
Ir3Mike6909
11-27-2007, 09:07 PM
6.5
HPR 270, LPR 57, verified with gauges? If so I'm at a loss, might be able to tweek the trigger adjustment a little to help, but from what you've indicated, seems like everything should be just fine. You might want to give an MT a call and see if they have any further insight. And as for the Full Auto, it's not unlimited, it's capped at 15 bps so 14 over the radar is pretty much what is to be expected. I did a video with full auto (unlimited, or so I thought) and ramp and you can definitely tell the difference, I can send you the video link when I get off work if you want it.
Ir3Mike6909
11-29-2007, 07:56 AM
yea thatd be kool. Can anyone just explain what shot filter does. Explain what both extremes will do; 100% and 5%?
I maybe wrong but I have always understood it to be the same as shot delay, the % of the firing cycle that must complete before the marker can be fired. If you where at 100%, that would mean that the electronics would delay the solenoid from being activated longer, a preset time that would allow the bolt to travel forward and return, ball to fall into place and pressure to recharge, at 5% it is at the minimum pre-programmed delay.
Here's the video...http://www.youtube.com/watch?v=l9GJp7g7JiU
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.