Dye throttle tank question

[herendir]

Is the dye throttle tank system low or high pressure ? I have a 45/4500 dye tank and I went to the dye page but it only sez that it is 850 psi, not if it is high or low pressure. Also, I read on some threads here that the good psi pressure for the angel are 600psi, do I have to take out some springs off so I can get to 600psi or I can just play with that 850 psi ?

[SPECIALNEEDS]

800 psi is high pressure.

low pressure is like 450 psi

[BoB]

We recommend having the regulator tested to ensure it is working correctly. Our experiences with the throttles are they tend to run 900-1000psi on a full fill.

[herendir]

So what you guys saying is that I must buy a Lp tank ? or could I run my A1 with that tank ? please let me know. Thanx

[BoB]

Our recommendation would be to install a good LP regulator on your tank.

[herendir]

Ok, thanx.

[TheFreak779]

or you can get a CP reg and use your tank. that only will cost 100 where a new tank will be around 150

[skilz]

Or, as Bob said, he can get a tank reg for about $55-65 (no need for a new tank) that will put out lower pressure. Guerrilla Air's Ambush LP reg puts out 440-460 psi at $55, and their Myth reg putting out about 600-650 psi, which seems to be a more optimal pressure for the A1 as well as being the shortest reg on the market, can be found for $65.

[herendir]

What's the best Lp psi for the angel ? 600 psi ? let me know.

[skilz]

What's the best Lp psi for the angel ? 600 psi ? let me know.

The "Search" button is your friend, don't be afraid to use it... but since you're new here I'll be nice. Follow this link:

http://www.angel-owners.com/showpost.php?p=587417&postcount=5

As per Ken Crane, optimum tank output pressure is 450-600 psi. You can use a tank regulator putting out 400 or so but you'll most likely experience severe velocity dropoff as the tank begins to empty (about 1000 psi or less remaining).