A4 Fly Choppin Paint

[Mastiff]

Just got a A4 Fly with Virtue Board..
Running the reccomended settings.
55 PSI on the LPR
190 on the minireg.
dwell at 12
It breaks paint alot..
I have matched the barrel to the paint and its fine..
all the other people using the same barrel size and same paint at the field I'm
playing at are doing fine with the paint.

this is not just when I'm ripping on it...
sometimes happens doing very slow shooting... 1....2.....3... Blah! broken paint..
Using a Halo B for the hopper.

is their some setting or something that is reccomended when using a virtue board opposed to using a stock angel a4 fly board?
Thanx

[Shibbykins]

virtuepaintball.com i think is the link to the manufacturer, read the manual

J

[Mastiff]

I have read the manual and it says the same stuff as everone else..
match the barrel to the paint... not explanation to why it would break other than that..
I have a call into virtue also..
Can anyone using an a4 fly with a Virtue board post their settings?

[Shibbykins]

id post mine but i dont remember

check your MROF

[speedysprocket]

change your hopper speed settings, make them lower and see if that works. I dont know if you can do that with virtue

[BoB]

Try the trouble shooting in this thread: http://angelowners.com/showthread.php?p=594455#post594455

Also, a dwell of 9ms is a good place to be and what is your FPS?