Regs, Operating Pressures, and nitro tanks

[D7Productions]

I have a couple of questions. Sorry if they are stupid, Ive been using cockers all my life and this is my first angel. What is the optimal pressure that I should be running into my gun? I have no internal upgrades, and ask so I know wha to set an adjustable tank at, or If I should just buy the Crossfire 45opsi output tank and run it straight. Can I run any preset tank straight on my angel? Will other regs (Like the ANS Gen-X 2) fit on my angel, or are they not necessary. And what Adjustable outpur rig in the lower price range works the best in your opinion. Let me know!

:samurai:

[dr.strangelove]

Between 500 and 600 psi from the tank into your mini reg is ideal. You don't need a new reg, the mini works great with the angel, but if you want to fit a new one, any standard thread reg will work. You can run preset into your angel no prob. I'm not entirely sure what you mean by "adjustable output rig", so I couldn't help you there.

[MooShoo1717]

450 is to low for any angel except the new speed. People set there output of the mini reg at like 500. you would need to get a 800 output or an adjustable to get the 500-600. If you are getting a speed the 450 might work depending on how your speed is tuned. If you get a speed best bet is adjustable or HP with a new reg or with a thor. The thor (made by pmi) you screw your HP preset in and it regulates it to like what every you want. lets say 450. A pressure you mini reg can handle. Then the mini reg drops it to like 300 or 350( not quite sure on the 300-350) Hope this helps.