Breech Pins

[broncos765]

Problem solved, thanks master techs Bob and Frazer

[frazer]

yes you would need new pins, e-mail me with your guns serial number and your address and I will get a set sent out to you.

frazer@wdp.tv

[calhoun]

My breech pins are also bent but i cant find anywhere that sells new pins.

[calhoun]

also what would be the easiest way to removing the allen screws of the breech? Is there locktight on the screws do i need to heat them?

[calhoun]

Does anyone know how to get the allen screws out of the gun without stripping them?

[DDcaptain]

Yeah, I think i need new breach pins to. This is whats happening... It started about 2 weeks ago. When i shoot every 1 out of 100 shots the blot would get stuck forward. At first i didn't know what was wrong. But then i heard another person having the same problems. Then he told me that it was the beach. Which now makes sense to me now.

Now the problem has gotten worse, about 1 out of 10 shots the bolt sticks forward. If i watch the breach when it gets stuck the breach moves up a little and does not re aline. Until i do it my self and push my thumb against the breach and the bolt pops back.

I currently have tape rapped around my angel to keep the breach from moving. So can someone help me.

Thanks
Chase

[broncos765]

I just got my breech pins in. (Thanks Frazer) Does anyone know how to install the new pins? I can't get the old ones out...

Thanks

[BoB]

You will need to extract them very carefully by using an M2 threaded screw.

[frazer]

Chase have you checked on the breech seal? this is the most likley cause for you issue, if the seal is moving about and the glue has gone all gummy then it will need replaced.

frazer@wdp.tv

[broncos765]

Thanks Bob, I found a M2 screw and replaced the pins sucessfully. AOG FTW

[DDcaptain]

Chase have you checked on the breech seal? this is the most likley cause for you issue, if the seal is moving about and the glue has gone all gummy then it will need replaced.

frazer@wdp.tv

yeah, i think this could be the problem.. can i just super glue it my self?

[frazer]

yes

[obidamnkenobi]

sorry for resurrecting and old thread, but saw no need for a new one..
I need to change my pins too, waiting for them in the mail. I've removed the rearmost grub screw, but in the one in front the allen key wont fit. This is the same size right, 1,5mm? Afraid it my be stripped somehow. Weird since I havent touched it before.. Or am I missing something here? thanks