a4 fly shoots once then stops....

[FRANK MARZOCCHI]

can anyone please help me on this, have a a4 fly when i gas her up everthing looks fine but when i shot it it shots once then it stops.
it still clicks telling me it is still working but thats it.

using a un1board from luckys and a ace chip, checked the o-ring, etc and still nothing.
also am getting a small hissing sound in side the body frame.
some please,please help me on this.

frank

fmarzocchi@tycoelectronics.com

[GMG Force Fly]

Check your solenoid gasket. Its probably backwards.

[FRANK MARZOCCHI]

thank you, am going to be a really knob on this, were is that, i just got this thing a few days again.
lmk

frank

[GMG Force Fly]

Right there, there is another one below the blue plastic. If you have a manual read it completely a couple of times, if you dont download it and prinit it out and read it.

[FRANK MARZOCCHI]

thank you, will check the manual...

frank

[BoB]

You are using a 9v and not the stock battery, correct? Fresh 9v battery? What is your dwell set at?

[FRANK MARZOCCHI]

yes, am using a 9volt battery, and of course brand new and my dwell is set at 7

[BoB]

Raise the dwell to the factory setting of 11ms and see if that changes anything.

[FRANK MARZOCCHI]

thank you, will try that tonight, will set it at 11 or more.

frank