**********max Flow Mini*************

[mikk006]

Crossfire 68/3000 tank w/ Micro Maxflow reg.
Pics on request....
Asking 100 oBO
So make some offers!!!!!!1
http://i5.photobucket.com/albums/y195/LikeOKandStuff/IMG_3697.jpg
http://i5.photobucket.com/albums/y195/LikeOKandStuff/IMG_3700.jpg
http://i5.photobucket.com/albums/y195/LikeOKandStuff/IMG_3699.jpg
http://i5.photobucket.com/albums/y195/LikeOKandStuff/IMG_3696.jpg

[mikk006]

C-mon i need this sold ASAP

[mikk006]

Up Up!

[mikk006]

Come on now no offers?

[JACKAL...]

low pressure???

[drkanglr]

trade for 68/3000 PMI screw in? Less than a year old, always in a cover, no scratches or marks? LMK

[Elren]

Whats the adjustable pressure range on it?

[Evil_Angel]

Whats the adjustable pressure range on it?


Yes it is. I am not saying this is the way to do it but I have taken them apart more often than not. Just like the mini reg on the angels fore grip there is spring cups. There is ten like this in there )()()()()( in this order as new and they have a 850# output. It worked to be about 50# per cup flipped lower.

I ended up like this in both of mine. )()((((() and down to 585#'s If I flipped the last one over it would drop to 400#'s after that like this )()((((((( This was too low for my A1. So I flipped it back and run them both like this. The consistent air flow is the best I have found.

I used a old ASA with a pressure gages on it. Then a gas through grip with a micro like fitting on it to test the output pressure of the max flow. IF you go to smart parts you can get the manual in PDF format to see how to take it apart.

By no means do I take irresponsibility for your actions from reading this post. I am just stating what my findings were and how I got them.

Cheers Don.