Hlp my finding a selenoid

[corellon]

I just receive my Angel One Joy Division...And i think my selenoid is dead...
I dont ear the little click when i'm shooting (i dont have air so i cannot tell if it's shoot)
Right now i'm in hartford, CT and i'm playing tomorow in Old Bridge, NJ

Is there place where i can find a selenoid...

please help me...

Ho and i have not buy the gun new...so dont bother with warranty.

[Mavrick]

I would check the battery first. Just put in a new one. While you have the grip cover off look to see that the solenoid wire connector is plugged into the board. I highly doubt that the solenoid is dead.

[nosauten]

I just receive my Angel One Joy Division...And i think my selenoid is dead...
I dont ear the little click when i'm shooting (i dont have air so i cannot tell if it's shoot)
Right now i'm in hartford, CT and i'm playing tomorow in Old Bridge, NJ

Is there place where i can find a selenoid...

please help me...

Ho and i have not buy the gun new...so dont bother with warranty.

Who is Ho? Is Ho your, uh, team mate?

Anyway, you won't hear the click unless you have your eyes off or if there is a ball in the breach. It's an opto board.
My suggestion, put it in demo mode and pull the trigger. You should hear clicking like crazy; then your stuff is working.

Also, put it in any mode, hold your trigger for a few seconds backward then the led light should turn red (eyes off), now pull the trigger. You should hear clicking, but keep in mind it won't ramp with eyes off.

EDIT: Mavrick just beat me to the post :) Try his suggestion first.

[frazer]

have you turned the eyes off to start with, if you have no air and no paint you will need to have turned the eyes off in order to get the gun to respond to any trigger pulls.

Frazer@wdp.tv

[corellon]

thank all for your response....i find my probleme...it's the trigger...the guy who sell me the gun put the activation point to short and the trigger dosent response...now i have the worst trigger job ever made but the gun work :-)

I have my afternoon to make the trigger better.


Thank all

[corellon]

have you turned the eyes off to start with, if you have no air and no paint you will need to have turned the eyes off in order to get the gun to respond to any trigger pulls.

Frazer@wdp.tv

Now it's work but the selenoid make 2 different click...One like every other click i have ear from a Angel One and sometime (most of the time) i ear a very tiny click.

I have change the battery to be sure but it make the same noise...

What can it be...

P.S. i'm searching somewhere near hartford to fill a my bottle :-(

[Bleda]

the solenoid is very quiet on the A1. I would try shooting with air before worrying about whether its really broken or not...

[corellon]

I finaly find some air...And everything seem find...

Thank all for the reply