Will G7/A1 rpings work in LPR?

[Aznrevlazn]

Hey, i noticed my LPR wasn't recharging quickly like my G7 Fly does, ill G7/A1 springs work?

[Aznrevlazn]

ok nvm, they work, remarkeably well! I threw in the 3 shims from my g7 fly and WOW. The recharge rate was so much faster, Imma see if Mark has any fly/a1 style springs at the store.

[cHc]

o dam this would be nice to have.

so you are replacing the spring stack?

[Aznrevlazn]

yup, gonna head to Impact tomorrow, as usual, and going to get G7/A1 Spring Stacks to replace the A4/5speed spring stacks. I am going to make a video tomorrow showing the major difference in recharge rate, it's unbelievable.

[cHc]

nice im gonna order one

[cHc]

this would be the correct thing right?

http://www.fixmyangel.com/catalog-product494

just want to make sure

[Aznrevlazn]

yup thats correct, iono if it's the set of 3 or just 1 spring, you might wanna give ken a call first.

[Aznrevlazn]

before you order, the spring stack will not go below 70 PSI. You will need take one of the shims (the one closest to tthe LPR body and sand the base of a bit with a very high grit sand paper. It may take a while since these are made of stainless steel.

for the fun of i i aired up my Arsenal G7 Fly and WOW thing shot lasers with reballs :D

[cHc]

so after modding you could get the pressure down?

[Aznrevlazn]

correct but you will need to trial and error to get the right pressure. but first try the spring stack stand alone first. If the pressure is too low, just add shims (not more spring stacks).