Exhaust Valve Question

[octane89]

Just picked up a Rage A1 in a trade-It happens to have a exhaust valve leak though. What would I need to do to replace this or fix it. I know I have to remove the eye covers to get to it, but does it need any orings or lube?
Just curious to see how I could work on this.
Thanks

[Bleda]

Q - My Angel One leaks and I don't know how to fix it?

A - See http://www.wdp.tv/leaks/leak-diagnosis.html for further help in fixing your problem.

[bigwilly01]

Check the Exhaust valve stem. Most likely culprit. pull plug on front of marker and stem just drops out. If it is damaged replace and try again. If not follow directions in the manual to remove the eye covers the minireg and housing and then pull the pin locking the valve itself in place and carefully remove and replace orings.

[octane89]

Well it has to be the exhaust valve since it won't come out. By that I meen it's stuck.

[Mavrick]

Once you have the cap off and the spring stem removed push on the pin that extends slightly on the ram side. It should pop out. If it doesn't then you will need to remove the grip and pin to push out the whole assembly.

[octane89]

Well I know how to do that now but the stem is stuck. And I'm in the process of doing the dissassembly with the grip but the pin under the foregrip is giving me problems now. Especially since I didn't get the M3 tool to remove it.