IR emitter for trigger fang detection

[Aznrevlazn]

fried the emitter, for the trigger sensor. The component is translucent blue and emits an IR light. I am hoping someone on the forum's can help me out here. It's nothing urgent, i bought a new fly board from Mark at Impact Paintball so the gun is fine, just wanna repair this one as a spare. Perhaps Mark will let me have one of the A4 boards he's got from the A4 to A4 Fly conversions he's done.

I'd use my Egg's eyes but thats a back up, I can't use my y-board's eyes because i used that for my ion's opto switch.

on the back it says V19412, i tried NewarkInOne but they don't have the component. Even google showed nothing.

http://l2concept.nrgservers.net/WDP/Angel%20Joy%20A4%20Fly/SANY0013.JPG

[Maniac20]

Well, I searched Digi-Key, Mouser, Allied, and even Datasheetarhive and found nothing. Maybe you could get the part number off of one from your egg and look for that one to replace this.

[Aznrevlazn]

yeah, i am gonna stop by Impact tomorrow to see if Mark has any fried boards he wwould like to donate.

[Aznrevlazn]

i got he board working. Botht he emitter and Reciever were fried. Probably due to prolong heat exposure from when i kept removing a re-soldering the components. I use the eyes from an Evolution Hopper and all is fine and dandy. Looks like i got me a Back-up board or a board for a Conversion when i find a nice IR3/LCD/A4/04speed!