hammar
05-14-2007, 10:09 PM
So what can you do if you accidentally lock your marker and don't know the code? You might have to get a new board, or bring the marker to a mastertech...well here's a handy way to unlock it in about a minute.
You'll need:
A neodymium magnet. (a small one will do just fine)
Instructions- open the grip (marker off) and rub the neodymium magnet over the board (both sides), put the grip back on keep the magnet away from the marker... turn it on and it's unlocked.
I suggest you reset the board and check your settings then chrono it before you shoot anyone. It probably erased or changed your settings.
I did this on a A4 Fly it worked perfectly and the marker works great. Is there a chance that doing this can fry your board, it could, but I doubt it. Although I don't know if I would try this on an A1.
You'll need:
A neodymium magnet. (a small one will do just fine)
Instructions- open the grip (marker off) and rub the neodymium magnet over the board (both sides), put the grip back on keep the magnet away from the marker... turn it on and it's unlocked.
I suggest you reset the board and check your settings then chrono it before you shoot anyone. It probably erased or changed your settings.
I did this on a A4 Fly it worked perfectly and the marker works great. Is there a chance that doing this can fry your board, it could, but I doubt it. Although I don't know if I would try this on an A1.