PDA

View Full Version : dwell Q


SicAngelSix
05-07-2007, 07:53 PM
I just recently took apart my fly, oiled and greased everything, and put everything back together. My original dwell setting was 9. When I shot it again for the first time after cleaning, it had very bad drop off. I increased the dwell to 11 and it shot fine. Does it need to be broken in again or something before I can lower the dwell again or what?

angel buyer
05-08-2007, 01:15 AM
The most likely answer is that you applied to much grease, and that it blocked an air passage. my advise would be to simply dry fire it a few times, then run a few bags of paint through it, and see if that clears it up.