PDA

View Full Version : Problem with my G7 FLY TADAO

JLee
05-05-2007, 09:53 PM
I do not know what I did but I can not get my fly to shoot. Very strange the gun dryfires fine it seems as if all the different firing modes work well if there is no paint in the gun. If I put one ball in the breach it will shoot it, but if I put two balls in I get nothing. The eyes are lit and the gun cycles fine I even reset all settings to factory defaults but I get the same thing.
kdlgunna
05-06-2007, 01:28 AM
well there has to have been something that happened that makes you think that there's a problem with yer tadao other than just out of no where it stopped shooting whenever there was a ball in the breech. a little more info on what might have led upto this would be good.
for2nato
05-06-2007, 02:02 AM
there is a known prob with the tadao boards going into program mode. check the light to see if it is cycling through the modes when it stops firing. if this is the case then turn on the tourney lock and it should fix it.
JLee
05-06-2007, 08:06 PM
This all just started when I when I was messing with the other firing modes. Ive had the tadao in my fly since last season and Ive never needed to change anything- the gun is sick without any ramp. I have noticed while dry firing the gun lights up like a rainbow. Do I just push the torny lock button to enable it?
Mavrick
05-06-2007, 09:13 PM
Go to this link and download the manual. Print it out and you should get through it fine...
http://angelowners.com/attachment.php?attachmentid=41913&d=1156616128
for2nato
05-07-2007, 01:04 AM
yea thats your prob. just put the lock on
JLee
06-15-2007, 09:06 PM
Gun still wont work need help by 2moro.
for2nato
06-15-2007, 11:33 PM
gees a month later? did you enable the tourney lock? i have seen this happen on a few tadaos and its always the same thing. program glitch causes the gun to go into program mode. but with the lock on its not able to enter that mode so it just works. also how much trigger pull do you have. if the pull is too close it may be your prob too.
kdlgunna
06-16-2007, 01:11 AM
did you change the eye mode to practice?
cuz if you did that then that might be why it lights up like a rainbow, it might not be program mode at all. beacause practice wont fire whenever there's a ball in the breech, and if you say that you're dry firing then that might be the case. to change the eye mode just go to the quick flashing green, and hold it down, it'll probably go to the 3rd blink on that then when it stops just press the trigger twice. that's default eye mode... that should fix it if it's your problem.