need a link

[John Rambo]

does anyone have a link to somewhere that will tell me how to soder the r/f chip for a pulse to my g7 fly?
thanks

[Erwin]

Hi Jonh R-
in see this link http://www.warpig.com/paintball/technical/loaders/pulse/tx_index.shtml but be careful, its in to the selenoid, before soldering u can prove it just attaching the wires on to the selenoid wires, be careful to don't over heat the selenoid. The seleoid wires are into a little door, just remove it the wires are not solder, just pull the wires and attach te wires.
Other think, do you attach the wires in to the optoboard, yes or not? Do you have optoboard or other boar like Tadao?

I have a pluse too, but I don't have a RF transmiter, but I will buy it soon.

[John Rambo]

i have just the stock optoboard and i just bought my pulse last thursday off ebay $120 but i want to get the r/f put in. i was thinking of having
local shop doit for me but they dont realy deal with highend guns cause of the area its more woodsball around here :(

[John Rambo]

i just need to know where the wires are that i cut so i can soder in a tie in of the r/f right. then u leave the chip in the space where the niod is?

[Erwin]

Ok, try to put the rf in the grip if you have sufficient wire, if don't have try in the selenoid space.
You have a RF transmiter?
You try the hopper port on the board?

[for2nato]

dont cut them. look around. there are places selling the adaptor to just plug it in. its like a splitter. only cost like $5. sorry i dont have a link. i just cant remember where i saw them off hand.

[Erwin]

Jhon R. Don't cut anything!!! Sorry I don't understad you.
here I post 2 pict that may can help you.
1.- If you try the board port and don't work the R/F
Please let me know!!
2.- don't need cut anything. Just remove the wires door in the selenoid and pull the wires, attach the r/f wires in to the selenoid wires, and reconnect the cables in the position that was exactly!
Thats will work!!!

[John Rambo]

ok thanks i know that tadao has an adaptor but i geuss it only works with their board not the stock board thanks though i let u know what happens

[nadrepadre]

i think you have to solder directly into thesolenoid wires. btw, give us pics of your custom milled g7 fly.

[John Rambo]

its in the g7 fly forum on the first page its before i got it all polished but its still freaken sweet its titled do it your self milling

[aviscomi]

http://destructivecustoms.com/home/rf-drop-in-harness

This company makes a RF chip harness for a few guns; I believe Angel is on the list (not A1) but I would call the to find out. They're web page is a little outdated.

[John Rambo]

thanks for that link the guy there confirmed it'll work on the g7 fly thanks for the help

[Erwin]

Ok, Please, now it explains to us that it did exactly