Please Help this Noob

[AngelJimmy]

i have a new g7 fly STOCK. how do i tune it to make it shoot at its fullest capability? please help or tell me what to do to it.

[John Rambo]

tr 1
dwell 8-9
adjust to the speed of your hopper check manual
mrof 30
set up the timmers if you want
and you could get the tool kit to adjust your lpr but not essential
cant remeber the rest
oh yeah adjust the trigger with weel and toe srew

i have the cash get a dezigns bolt from robert link
http://www.geocities.com/dezignbolts/

i you want to shoot even faster you can turn you tr up all the way you can hit 25bps easy with a stock halo b

[AngelJimmy]

when i shoot the g7 fly stock barrel..are the balls suppost to fly not straight? the curving around 20 feet in front of me. and also when i shoot i can feel air coming out of the little velocity adjust thing and is my gun suppost to be really loud? i heard other angel and they're pretty quiet. it may be that my velocity is too high? Srry but im new with this gun i had a spyder before this.

and John i have no clue what all those meant srry. Please explain

[GMG Force Fly]

when i shoot the g7 fly stock barrel..are the balls suppost to fly not straight? the curving around 20 feet in front of me. and also when i shoot i can feel air coming out of the little velocity adjust thing and is my gun suppost to be really loud? i heard other angel and they're pretty quiet. it may be that my velocity is too high? Srry but im new with this gun i had a spyder before this.

and John i have no clue what all those meant srry. Please explain

Are you using Co2 or Nitrogen?

[AngelJimmy]

system x compressed air. nitro w/e

[John Rambo]

ok the those are all board settings. if you have a manual it tells you all of those mean.
mrof=max rate of fire: so how fast your gun will shoot like puting a cap on your speed
tr= is kinda like the bounce signal the trigger gives off after each pull the higher you set it the more shots a secound will be added
dwel is how long the valve stays open increasing it will change that timing. you also change this for the type of paint you r shoting and the temp out side check the cold weather playing conditions forum under the g7 platform for more info on that
hopper speed: use this seting to set the gun to match your hopper speed 16 being the highest i have a halo and run mine at 16 and never chop any paint
if u look right above the grip cheeck there is a weel adjust that for the trigger like how far you have to pull back then you'll have to adjust the toe screw which is in the front of the trigger put a alen wrech in there so you can adjust the little paddle on the inside that tells the board to shoot. because if you set the trigger with a long pull you want to adjust the out and vise versa. i think thats it hope this helps

[AngelJimmy]

now i understand what all those are thank you

im still having trouble with the velocity probably. i am adjusting it clockwise but nothing...the screw is just coming out of the other side. am i doing something wrong or am i missing something?

[for2nato]

your probably using a high pressure output tank right? not all of the g7 platform markers run good on high pressure. mine run fine but others have problems getting the velocity under 300fps. also what kind of paint are you using? cheap paint doesnt exactly always fly straight.

[AngelJimmy]

how do i find out if im using high pressure or low pressure. I have a system x compressed air tank ? using gen X balls

[freakoutpaintballer]

I'm guessing that it's a high pressure tank. just take it to your local airsmith and they can probably drop in a low pressure kit. another thing you can do to make it faster would be to take the magnet out of the trigger wheel. to do so, just drill it out from the back.i did this and the trigger pull is fairly lighter.

[John Rambo]

that seems a little riskay even for me. for some reason drilling near the elctronics and leaving them exposed to the elements seems risky to me that is if im understanding what your saying correctly. plus im sure thats not legal for tourneys right.

[AngelJimmy]

i probably wont do that.

[Trigga Nometry]

No, no no! freakout is talking about removing the magnet from the vernier wheel on the G7 Fly. That will make the trigger insanely lighter and faster. You'll have to deal with some bounce but holy hell does it make the trigger light.

The "drilling" is only removing the plastic wheel and drilling a tiny hole on the backside of the vernier wheel so that you can pop the magnet out. YOu then reinstall the wheel and you're done. You are not drilling near the electronics at all.