Problems with my A4 fly...

[Tigerclaw]

Hi.
I got some troubles with my Angel a4 fly and i would like someone to help me.
I just got myself new laser-eyes. When i turn on my a4 with the new eyes, and put it in some mode, there is just a "tick" when i pull the trigger. Then I have to wait 2-3 seconds til it´s possible to pull the trigger and hear the same "tick" again. It´s almost the same in every mode. Is this right? Is there something wrong with my settings?
Thanks.
/David

[Michael Prior]

Is the gun aired up with paint? What are the eyes set at? What multi-color LED is flashing at start and after the "click" happens?

[Tigerclaw]

Hi.
I dont know what the eyes are set at. Where do i do the settings for them? The LED is slowly flashing red. I have tried to fire the angel with air and paint and now i got some real cleaning to do.
/David

[boostmonkey]

Check and make sure it isn't.

[Tigerclaw]

Hi.
The solenoid is not connected to the HOP port.
/David

[thatguy!]

Hi.
I have tried to fire the angel with air and paint and now i got some real cleaning to do.
/David

What do you mean by that?

Flashing red means the eyes are on and wont trip the solenoid more than once every few seconds unless paint is being run through the gun.

[for2nato]

it will only do that if the eyes are on and bad

[Michael Prior]

Flashing Red is low (or dead) battery. I had the same problem, tried to charge it. When charging it failed to fix it I replaced it with a new one and its working fine. Try down loading the manual that should help you more. You should get a flashing Blue when breach is clear a solid blue when breach is blocked.

[Tigerclaw]

Hi.
So it may depend on the battery? Ok, that would explain things. I did´nt know the angel could flash blue. I´ve only had this one for a month and i dont yet got a charger.
Thanks.
/David

[Michael Prior]

If you have a Tadao board then yes you need to read the LED and see what colors flash. If it is a WDP Fly board it has a battery symbol on the LCD face. You are posting in the AngelForce/Tadao Board Speed 03-A4 Fly forum, that would mean you have a Tadao board. LED should be solid blue breach blocked (paint or bolt is in the way), Flashing blue breach is clear (no paint). Try this page and see if it helps.

http://www.angel-owners.com/showthread.php?t=55716

[Tigerclaw]

Hi.
Well, i do not have a Tadao-board so i guess i posted in the wrong forum. Sorry. But my problems still remain.
/David

[Michael Prior]

1- http://www.wdp.tv/manuals/index.htm?fly/01.html
2- http://www.angel-owners.com/showthread.php?t=22328

Link #1 is the Fly manual. You will need that to work on your gun.
Link #2 is the Fly recomended set-up recomended being the key word. Read the forum postings old and new after a short while you will see some settings that seem to work better for you than others. If you don't have an Angel tool kit for your Fly you should get one. You will need it to make ajustments to the gun. Log in at Fix My Angel ( http://www.fixmyangel.com/ ) and call the phone # given at the site you can order parts and tools directly.

[for2nato]

listen flashing red means the eyes are on. angel boards do not automatically disable the eyes when they are bad. and if it flashes red and you are only getting one ball per 2-3 seconds then you have a bad set of eyes. just because the eyes light up does not meen they are good. the only way to tell if the eyes are working is to do the ball drop test.

[Michael Prior]

I just got myself new laser-eyes. When i turn on my a4 with the new eyes, and put it in some mode, there is just a "tick" when i pull the trigger. Read the manual