help plz

[danny0441]

hey guys have a question you know on the back of the g7 fly theres a little knob armlike that gos over the on/off switch is there anyway i can make that a bit tigher sorry if its spelled wrong any suggestions would be appreciated

[thog94]

To make it tighter, you will need to take off the arm and put an o-ring around the shaft. Put the arm back on and you will notice that it's a lot snugger. The size o-ring that being used is the same one that is used for the LCD detents. Sorry that I don't know the size off hand, but it's a start. Anything close enough to that size will work.

[geopouros]

Hi i got a small problem too a just got a a1 on/off with a drop forward but i do not now how to install the air tube ?? the drop forward comes very forward :) nearly after the regulator

http://i10.ebayimg.com/01/i/000/8e/02/2998_1.JPG

[for2nato]

put a 90 on the asa

[geopouros]

thats is what i was thinking but i do not seem to find in Cyprus!!!