a4 help

[R5TOM]

hi guys can u hep me aswear a couple of qwestions about my a4?

1/how can i get it to run on hp air?
2/how easy is it to put eyes on it with a4speed board?
3/were is the best place to get parts for the a4?
4/and wot rof should i be getting out of it?


ps dorry if aswears are in other thread i aint got time to look threw them all thanks r5tom

[for2nato]

1/ purchase an aftermarket reg. its the easiest and most consistant way to run hp.
2/you can not run eyes on the a4speed board. you would have to buy another board that accepts eyes.
3/ check with www.fixmyangel.com
4/ i can pull a consistant 17bps with a stock speed board and no bounce on semi.

[thog94]

Instead of buying another mini reg, just mod the original. Flip the 1st spring in the stack or completely remove it and you should be able to run a HP tank without any problems. Here is a link to the mod: http://angel-owners.com/showthread.php?t=22326

As for2nato said, you can't run eyes with the speed board. Along with purchasing a board that accepts eyes, you will need to mill and drill the gun yourself or have someone else do it for you. If you go with the MT eye conversion, everything is neatly and profesionally taken care of. I have seen other eye mods that are less than desireable.

Any of the MT's can help you out with A4 parts, their stores are listed here: http://angelforce.com/stores.html

Your ROF will depend on your set up as well as your hopper. What are you using for a hopper?

[R5TOM]

i have a halo b rip drive for my a4 wots the best board for a a4