Will an A1 work with HP?

[installer020]

Allright, please don't flame me for posting this. I have read so many contradicting threads concerning this question that I don't know what to think. Here are a few of the things I have been told.

A. If you use a HP tank on an Angel 1 you will have problems chronoing below 300fps.
B. A1's run best with input pressure between 550-600 and lower pressures can cause problems.
C. Both the 06 speed and A1 have a newly designed HPR that can handle HP tanks without any issues.
D. Angel 1's are much more complicated and difficult to maintenance than an 06 Ego or a DM6.

I am scheduled to receive my A1 tomorrow sometime during the day. The tanks I currently own are a Dye HP Peanut and a CP HP 48/4500.

I am looking for some straight answers that are hopefully not cluttered beyond truth with opinions.

Thanks ahead of time to everyone for the help.

Matt

[|ZooT]

A. no, hp will probably work just fine too, but lp is preferd (just dont go above 800)
B. 450 to 500
C. MOST angels can take hp without problems.
D. No, i'd say just the opposite

[John Rambo]

A. no, hp will probably work just fine too, but lp is preferd (just dont go above 800)
B. 450 to 500
C. MOST angels can take hp without problems.
D. No, i'd say just the opposite

:dito:

[Fizz]

For the 4th point... HELL NO! I have bot ha DM6 and A1, and the A1 is WAY WAY WAY WAY WAY x1000 more easier to maintain. I'm going to admit that I prefer how the DM6 shoots compared to the A1 a little bit, but the A1 is so reliable and easy to maintain I'm getting rid of my DM6 ASAP because it is pretty much the opposite