mode 5 not working

[pierce62]

I'd like to know how mode 5 is supposed to work. My g7 has the 1.5 software but it doesn't ramp at all, is it cause my fingers are too slow?

[WDP ir3 2k3]

No it would not matter about your fingers. Try to reset the bored and tell me how that goes. If that don't work you might have to get it flashed.

[Trigga Nometry]

It will only ramp with paint. Are you trying it while shooting paint?

[pierce62]

I guess i'll have to get it flashed, i reset and i was shooting paint but still no ramping action. Isn't 1.5 the latest? Also is it supposed to ramp to 15bps no matter how fast my fingers are or do i just have to get my fingers above a certain bps mark?

[WDP ir3 2k3]

If your fingers are really slow it should still ramp. Yes 1.5 is the newest software try out mode 3 PSP and tell me if that ramps.

[pierce62]

Yes mode 3 works fine, and all the other modes as well. With the exception in mode 4 i can't turn the eyes off. Does the TR setting have anything to do with mode 5 not ramping? If so should i set it at a higher number.

[thatguy!]

Mode 5 never worked for me either.

[Freaknfastman007]

mode 5 is just Semi Capped at 15bps there is no ramp

[pierce62]

My manual says mode 5 is accum mode that will fire more balls than trigger pulls. Mode 4 is semi capped at 15 bps. Doesn't matter to me anymore bought a new board now it's flying.

[Freaknfastman007]

but u also said that u have the 1.5 software, the mnaual is for the 1.4 software its different

[pierce62]

Did not know this, thanks for pointing that out. Am i supposed to have a ramping mode, because mode 4 and 5 seem no different to me.

[Freaknfastman007]

no there is no ramp on the gun, i think they are comming out with a soeftware version with the psp and nxl modes within the next month or two

[pierce62]

Thanks for the info Freakman.

[Freaknfastman007]

anytime