PDA

View Full Version : I wish it would ramp like demo mode.


Rockbert
02-22-2007, 07:10 PM
I was setting up my trigger today and it occurred to me that the non-existing ramp features of this stock board would be happily overcome by making one of the modes actually run just like demo mode.( No question here, just a comment)

Also , I see that the 3 shot per pull of mode 3 seems to only happen when the eyes are off.


Any thoughts?

I also had to solder my eye's emitter diode back onto the ribbon cable AGAIN !!! This is 3 times in a month.


Plus, anyone run at 16 hopper speed ? Does it make choppy chop chop-suey or not? (VLocity)

twilightrevolution
03-06-2007, 05:31 PM
i think if you adjust the trigger bounce settings (tr -> 22 or something like that) it's supposed to go pretty fast, rite? I dunno if it's the same, cuz i've never tried it before.

geopouros
04-02-2007, 02:54 PM
i have install on my g7 an intelifit on my own and i have the hopper at 9 trigger 22 and it rips at 24!!! at semi!! :) it cost me 30$

freakoutpaintballer
04-03-2007, 06:17 PM
yea i tried putting my G7 in demo mode and i removed the receiver eye and had my freind shine a flashlight on it. it worked, but after about 5 shots it jammed and the bolt got stuck forward.

for2nato
04-03-2007, 09:05 PM
if you want to have modes like that then you need an aftermarket board. i can make my a4fly shoot on full auto uncapped. check the vid

Click here to watch joy-48-38 (http://media.putfile.com/joy-48-38)

boostmonkey
04-03-2007, 10:07 PM
Whew nice!

for2nato
04-03-2007, 11:39 PM
i goldwaved it. its a pretty consistant 24bps. not bad for a halo lol

freakoutpaintballer
04-07-2007, 03:43 PM
yay

geopouros
04-08-2007, 05:45 AM
Try an intelifit as well cheap and really fast!!!

BAKERmancan
04-22-2007, 08:57 PM
Nice job nato...that thing rocked out for sure :o

angel buyer
04-24-2007, 01:28 AM
I can reach as high as 25 BPS on mode one with no goldwave, and no aftermarket parts, but i did have to set the TR to 20.

adw420
04-26-2007, 09:15 AM
What is goldwave?