why does it leak???

[SPECIALNEEDS]

i finally got a gauge to adjust my evolve lpr on my a4 fly

i dont know why but it is leaking from the evolve valve on the other side

i tried adjusting everything thats adjustable on the volumisers and it still leaks

its leaking from the circled hole

[RangerJoe]

grease o-ring. Slap a new o-ring on there ( -005)
Im surprised your not having problems with your evolve lpr

[SPECIALNEEDS]

i just put a brand new one on it with no luck

[RangerJoe]

Was it a -005?

[SPECIALNEEDS]

wow

i hate my life

now i cant even use it

i was screwin in the gauge and droped the volumizer
the screw part of the gauge adapter broke off and its now stuck in there

anyone know how i can get it out???

[RangerJoe]

huh?

[SPECIALNEEDS]

ok

i had the evolve volumiser off my gun

then i started to screw the gauge into the volumiser

then i dropped it and the screw part of it broke off

[RangerJoe]

you mean the evolve lpr, not the volly. ( the volly is the one where the valve rod goes)
so you had the gauge on lpr and dropped lpr and the screw from the guage broke from the gauge and is stuck in the lpr?

[SPECIALNEEDS]

yea

and it was a gauge with an evolve lpr adapter

and its stuck with none of it stickin out for me to grab it with something

[RangerJoe]

hrmm. I never had a evolve lpr- only the lite kit. Take out the internals of the lpr. Can you see the screw from inside?

[SPECIALNEEDS]

lol

i cant get the internals out because the screw part is holding it in

[RangerJoe]

take a pic of what the outside looks like. i might have an idea.

[Trigga Nometry]

That leak on the valve side is either the o-ring (as already stated by RJ) or it could be from a valve stem that is too short. There have been several complaints that the valve stems have been too short and Evolve had to replace them. Do a search on "valve stem" in the Evolve forum and you'll see what length they should be. I cannot remember what the exact length was but I know there was a problem with some of them.

BTW - I am going to move this to the Evolve forum here on AOG.

[SPECIALNEEDS]

ok here it is

one is the back

one is the front

one is the hole that it is stuck in

[RangerJoe]

so its a threaded screw that stuck in there? is that a hole in the middle on the screw?
BTW Trigga- I belive its 4.5 in- if it leaks with a -005 its the valve rod too short probly- bump up o-ring to a -006

[SPECIALNEEDS]

yea

it has a hole in the middle

[RangerJoe]

is it hexed or just circle like

[SPECIALNEEDS]

just a plain circular hole

[RangerJoe]

hmmmm, how far down it go. Stick something that will go down and put finger where the end of it is. Then measuer.

[SPECIALNEEDS]

i cant because the internals wont come out because of the screw


its in all of the way because i screwed it all of the way in the i dropped it

[RangerJoe]

what your gunn have to do is-
either get like a dowel that will fit snugly in there and try to unscrew it( or a real thin one and get a piece of rubber around it, if it will fit) or
i dont know lol

[SPECIALNEEDS]

lol maybe i can superglue something in there and just screw it in there

or i can just use my gun stock

anyone know how to adjust the lpr of my gun with no gauges??

[RangerJoe]

dont know why you bothered with that thing ( evolve lpr) should of gone with jds........

[SPECIALNEEDS]

thats what i was thinkin

but i didnt buy it so why not just try and use it right?

[RangerJoe]

i suppose but its more of a hassle than reward IMO

[SPECIALNEEDS]

yea

if i can get it out ill put everything back together sell everything that i have from evolve

and buy a jds
does the jds come with a gauge?

[RangerJoe]

nopers. Have to buy a gauge from Boostmonkey.
It goes in the back of gun ( behind backplate- there is a grub screw- that it the lpr air passage to solinoid)

[SPECIALNEEDS]

man

how much does that total up to

gauge and all

[RangerJoe]

gauge is $25 from boost. Pm him
jds- $60 or 65 i forget.

[SPECIALNEEDS]

cool

when i can get it sold ill get that

[for2nato]

i pm'd you. call me

[SPECIALNEEDS]

here