SilverTT
04-10-2003, 11:46 PM
Well, I searched through all the 256 Tech posts about the LED's and got 1 diagram that is semi usefull for what I'm trying to do.
Here is what I'm trying to do exactly;
-Hook up a REMOVABLE intelifeed kit.
The writeup on my basic idea is found here, but it lacks many items I need to have covered.
http://www.g3pb.com/intellifeed_wiring.html
I like the idea of the stero cable hookup, but I want to take this 3 steps further. I want to make a perminate (sp?) Female radio jack inside of the Revy and have the Male radio jack w/90 Degree elbow be able to plug in and out.
2nd I want to be able to keep the current Revy wiring as well as have the Intellifeed wiring when hooked up.
3rd I purchased two LED's (he he auctial lights) and was going to wire them up to have one light up when the auctial intellifeed is plug'd into the Revy and have the other blinking when the Angel is sending the signal to the Revy to agitate (sp?). I don't know if the last LED wiring is possible seing as there is only two wires in the intellifeed kit.
I was wondering if anyone has a wiring schematic for the Standard 12V Revy hopper BEFORE Brass Eagle took Viewloader over. (I don't know if anything has changed since the take over or not)
My other question is can anyone identify what type of milling is done to my Angel. It was purchased off of a member of Team Diggers back in 99, and is susspto be a "rare" gun with a prodotype KAPP bolt. All pictured is what came with the gun besides the Dye trigger guard. The picture isn't that clear unfortunatly. There is a elongated Triangle type design one each side of where the barrel screw's in. And on the top of the breech there is a "JR" carved in, as well as the back plate is annod'd Gold.
Thanks to all who take the time to help me out.
John
Here is what I'm trying to do exactly;
-Hook up a REMOVABLE intelifeed kit.
The writeup on my basic idea is found here, but it lacks many items I need to have covered.
http://www.g3pb.com/intellifeed_wiring.html
I like the idea of the stero cable hookup, but I want to take this 3 steps further. I want to make a perminate (sp?) Female radio jack inside of the Revy and have the Male radio jack w/90 Degree elbow be able to plug in and out.
2nd I want to be able to keep the current Revy wiring as well as have the Intellifeed wiring when hooked up.
3rd I purchased two LED's (he he auctial lights) and was going to wire them up to have one light up when the auctial intellifeed is plug'd into the Revy and have the other blinking when the Angel is sending the signal to the Revy to agitate (sp?). I don't know if the last LED wiring is possible seing as there is only two wires in the intellifeed kit.
I was wondering if anyone has a wiring schematic for the Standard 12V Revy hopper BEFORE Brass Eagle took Viewloader over. (I don't know if anything has changed since the take over or not)
My other question is can anyone identify what type of milling is done to my Angel. It was purchased off of a member of Team Diggers back in 99, and is susspto be a "rare" gun with a prodotype KAPP bolt. All pictured is what came with the gun besides the Dye trigger guard. The picture isn't that clear unfortunatly. There is a elongated Triangle type design one each side of where the barrel screw's in. And on the top of the breech there is a "JR" carved in, as well as the back plate is annod'd Gold.
Thanks to all who take the time to help me out.
John