tank help

[lop3z]

arryte so i just got my new g7 and i was wondering what type of tank i should get for it. from my understanding i would need a LP tank right? is a Pure Energy 68/4500 Fiber Tank LP?

[nadrepadre]

you should be all set.

[lop3z]

so i could use this Pure Energy 68/4500 Fiber Tank? apparently all of their 4500 tanks are HP, this wont screw up my g7?

[RangerJoe]

might , might not. Some guns work fine with them, others dont.
Get a crossfire Lp. They are reliable and are consistant.

[lop3z]

nice ws thinking about a crossfire. how bout an empire fuel lp>?

[lop3z]

would a empire fuel lp with about 300psi be useful in a sence that my paintballs wont just trickle out of my barrel? lol

[lipe33]

I personally like the Guerrilla Air on tank regulators. I use an Assault LP regulator and it is shorter than my Crossfire LP regulator by about 1/2", weighs about three ounces less (120 grams vs. 200 grams), and flows very well. Every single piece can be order separately if something gets damaged. Not to say the Crossfire isn't a good regulator. It is very good. I just like the Assault LP more. If weight is a concern try to find a carbon fiber tank.

[lop3z]

yea the empire im looking at is a cf tank but im concerned with the amount of the output is has. would 300psi be enough?

[for2nato]

no. 450psi

[lop3z]

no. 450psi

really? can the psi be adujusted?

[for2nato]

that depends on the reg on the tank. some can and some cant. but the optimal output into the marker is around 450psi. and up to 850psi. but some angels are touchy at the higher input. i personally have a g7 and a g7fly both with stock miniregs on them and i use high pressure with both of them with out any spiking or high chrono marks. but thats just me.

[BoostLee]

^^^^^Now my buddies g7 doesnt work worth a §§§§ with a HP tank. We couldnt get it down below 270fps with it spiking all over the place. Your best bet.....stick with L.P. tanks.

[paintchick79]

If you have a Pure Energy tank, you can rebuild it for low pressure. All you need is a $15 part that you can install yourself.

One of these should do it:
http://www.anythingxtreme.com/PMI-Pu...8.aspx?AFID=21
http://www.discountpaintball.com/pro...oducts_id=1812