Angel Led breaking paint

[liquidblue]

My Eclipse breaks a lot of paint and chops here and there. Pretty much no matter what type I put through it. What could be wrong with it?

[SPECIALNEEDS]

it doesnt have eyes

[liquidblue]

beleive it or not guns did function fine before eyes. Now lets hear from someone who's not a complete retard.

[for2nato]

hes not a retard. he just has "specialneeds"!
lpr could be running to high. or your dwell could be too low. i would try turning up the dwell first. give the ball more time to fall into place. what are your settings and how is your velocity?

[SPECIALNEEDS]

beleive it or not guns did function fine before eyes. Now lets hear from someone who's not a complete retard.


beleive it or not that is a pretty common explanation of why some peoples guns are chopping here and there no matter what kind of paint they are using.and sometimes im not retarted

[liquidblue]

lol ok. my dwell was around 1/2. velocity is around 270

[LOG]

Couple more ideas, mine did this alot when the battery was close to dead. Not really sure why but was incredibly annoying. Also check your hopper can handle your rate of fire and maybe the ball detent? Hope these wernt to obvious!

[rammstein_5]

make sure your ram is adjusted properly aswell.

[for2nato]

yea if your batt is low it wont give the full amount of energy to actuate the noid properly. in a sense lowering your dwell. and i hope your dwell was at 12 and not 1\2

[chris71383]

Was is working fine and suddenly started breaking paint? Generally when I see this problem its the ram isn't adjusted properly, as in not turned in far enough so that the breech clicks when you open and close it. The other big thing is that the detent is stuck or the ball is missing all together.

[Blister]

How's the Breech O-Ring? Mine went missing on one of my Angels and it started chopping, so that may be your problem as well.